PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 01/06/2020 9:50 AM by  Joe Schlereth
DC current transducer output
 1 Replies
Sort:
Please register and login to participate in the forums.
Author Messages
Lorne Lambert
New Member
New Member
Posts:1


--
01/05/2020 4:51 PM
    I have a CR9321-NPN that I thought it might be activated by DC current with the information on the label. I am hoping I could be guide to a DC current switch with the same out put as the CR9321-NPN as it is connected to a 1 wire device supplied by Welserver.com. The 24 VDC solenoid is 5000 ohms so the current is minimal.
    Thank you Lorne
    Joe Schlereth
    New Member
    New Member
    Posts:4


    --
    01/06/2020 9:50 AM
    Hello Lorne,

    Thank you for your question.

    After reviewing, the CR9321-NPN Senses or activates an AC Current Only and switches a DC Voltage with the NPN Option.

    If you are looking to activate or sense a DC Current and switch a 24VDC solenoid you would require our CR5395 DC Current Sensing Relay with either the NPN or ELR Output Option.

    Please visit our website and search for 5395.

    If you have any questions you can email me at the below email address

    Joe Schlereth
    Technical Sales
    CR Magnetics
    jds@crmagnetics.com
    3500 Scarlet Oak Blvd
    St Louis, MO 63122
    www.crmagnetics.com
    636-343-8518

    Please register and login to participate in the forums.


    Copyright 2024 by CR Magnetics