Transducer Name:
!04CRD5170-130-30

When requesting "all data" from this DataStream transducer
I receive the following data:
>+0.8750+0.5047+0.8811+0.5050+0.0000+0.0002+0.2543+0.1501+0.666759.973


From this data I calculate each field.
Voltage1 = 130*0.8750 =113.75
Current1 = 30*0.5047 = 15.141
Voltage2 = 130*0.8811 =114.543
Current2 = 30*0.5050 = 15.15
Voltage3 = 130*0.0000 = 0.0000
Current3 = 30*0.0002 = 0.0006

Power = 30*130*0.2543 =991.77

When I calc watts for the info (P=E*I) it's not even close to
the power value.

Phase1(113.75 * 15.141) = 1722
Phase2(114.543 * 15.15 ) = 1735
Phase3( 0 * .0002 ) = 0.006
Power from above = 991.77

*** What am I doing wrong? ***


Thanks in advance,
Bud