Go to previous topic
Go to next topic
Forums
CRMagnetics Discussion Forums
Product Questions
Last Post 10/02/2013 2:16 PM by
Will Lowes
Help choosing the right part
1 Replies
Author
Messages
raj aryan
New Member
Posts:2
09/30/2013 3:58 PM
1. I am using CR8348-2500-N
2. My input current is 0.1A to 2A typical.
3. I would like to get DC voltage out to my microprocessor. Preferably 0.1V for 0.1A. can i get better range?
4. Can you recommend a ckt to get the above.
5. What should my burden resistor be?
Will Lowes
CRM Staff
New Member
Posts:2
10/02/2013 2:16 PM
Dear Valued Customer,
The output of the CR8348-2500-N is an AC Current. In order to get a DC voltage to send to your microprocessor you will need to condition your signal. I have attached an application guide outlining the procedure.
Attachments
002_001_Precision_Rectifier_Circuit_for_CT_Signal_
Forums
CRMagnetics Discussion Forums
Product Questions